
Hydro
dippingSunshine Coast.
Carbon fibre, timber grain, camo or your own print, applied to trim, engine covers and wheels at our Caloundra West studio.
What hydro
dipping is.
Also called water transfer printing, immersion printing, hydrographics or cubic printing. They are the same process.

A printed film is floated on water and activated, and the part is dipped through it. The pattern wraps around every curve and edge, which is why it suits shaped parts like engine covers, trim and wheels that vinyl can't follow.
The film goes over a base colour and is sealed under automotive clear coat, so the finish is permanent. It works on almost any hard surface: plastic, fibreglass, metal, wood, ceramic and alloy.
The carbon look on your own parts. Genuine carbon fibre parts are expensive. A dipped finish copies the weave, the colour and a gloss, satin or matte finish over the part you already have.
Parts we
hydro dip.
If a part can go under water and be painted, it can be dipped.
Interior
Dashboard trim, door inserts and centre consoles, including dated woodgrain trim. For trim taken to plain black, see chrome delete.
Exterior
Mirror caps, grille surrounds, badges, light panels and wheels. For a painted colour change on wheels, see alloy wheel repairs.
Engine bay
Engine covers, airbox covers and other engine bay parts. An engine cover can come in on its own.




Patterns
and finishes.
Over 100,000 films to choose from, and a custom print when none of them is right.

Carbon fibre
Weave pattern, colour and a gloss, satin or matte finish matched to the factory carbon on your car.
Timber, camo and geometric
Timber grain, camo and geometric patterns from the film range.
Custom prints
Any pattern, logo or design can be printed as a film and applied under clear.
Base colour
The base coat under the film is chosen to suit the pattern, and you approve both together.
How a part
gets dipped.
Done in stages, so the pattern is bonded to the part and sealed for good.
- 01
Sample
A sample piece is dipped first, so you approve the pattern and base colour before any of your parts go in.
- 02
Prepare and base coat
Parts are scuffed, cleaned and primed, then sprayed in a base colour that suits the pattern.
- 03
Dip
The printed film is floated on a temperature-controlled water bath and activated, and the pattern wraps around the part as it goes in.
- 04
Wash and clear
The part is washed of residue, dried and sealed under several layers of automotive clear coat.
Hydro dipping
questions.
Cost, lifespan, what can be dipped and what happens if you don't like the pattern.
How much does hydro dipping cost on the Sunshine Coast?
It is priced per job, by the size of the part, how complex its shape is and how much preparation it needs. Send photos of the parts for a quote.
Is hydro dipping the same as water transfer printing?
Yes. Hydro dipping, water transfer printing, immersion printing, hydrographics and cubic printing are all names for the same process.
What can be hydro dipped?
Almost any hard surface: plastic, fibreglass, metal, wood, ceramic and alloy wheels. If a part can be submerged in water and painted conventionally, it can be dipped.
How long does a hydro dipped finish last?
Typically 5 to 15 years, depending on where the part lives and how much it is handled. Interior trim and fixed parts last longer than things handled every day.
Is hydro dipping permanent?
Yes. Sealed under automotive clear coat, it resists UV, chipping and fading. If you want a different look later, the part can be sanded and repainted.
What if I don't like the pattern?
You see it before your parts are done. We dip a sample piece first, and you approve the pattern and base colour.
Do the parts need to come off the car?
Yes. Each part goes through the water bath on its own, so it has to come off the car. Loose parts, such as an engine cover, can be dropped at the studio.
Got a part
in mind?
Send the details and a few photos. We reply with a price where we can, and available dates.
